Adjusting Disc, valve clearance

Over time, valve stem seals can start to leak due to wear and tear. The high stress caused by fluctuating temperatures or mechanical pressure makes the material porous, hard, or brittle. This can cause the valve stem seal to crack or break, resulting in leaks.

Symptoms of a faulty valve stem seal

Oil leakage: You see oil stains under the car or oil drips on the ground.
Topping up oil more frequently: If you notice that you need to top up your oil more often than usual, this could indicate a leaking valve stem seal.
Oily spark plugs: The top of the spark plugs feels oily.
Oil pressure warning light: In case of prolonged problems, the oil pressure warning light may illuminate.

Adjusting valve clearance

Adjusting the valve clearance is an important task to keep the engine running smoothly. Here are the general steps to adjust the valve clearance:
Disassembly: Remove the rocker cover to access the valve stem seals.
Determine compression stroke: Rotate the engine by hand until the piston of the relevant cylinder is at the top of its compression stroke (both valves are closed).
Measure with a feeler gauge: Place a feeler gauge between the valve stem seal and the valve rocker arm. The correct clearance depends on the make and model of the car, so consult the specifications in the manual.
Adjust: Turn the valve adjuster screw or nut to achieve the correct clearance. Recheck with the feeler gauge.
Repeat for other cylinders: Repeat this process for all valve stem seals.
Reassembly: Refit the rocker cover.

Remember that specific instructions may vary depending on the make and model of your car.

Order your valve stem seal at Winparts

You can easily find the right engine parts for your car using the registration number or car model. You can simply enter these on the website and the correct parts will be shown. At Winparts, in addition to valve stem seals, you will also find other engine parts, such as: cylinder heads, oil pumps and intake manifolds. View our webshop and order today.

Fit guarantee, show parts suitable for your vehicle.

Please manually select your vehicle

Adjusting Disc, valve clearance

The valve seals, or valve stem seals, are responsible for sealing the gap between the cylinder head and the engine's valves. When intact, they prevent exhaust gases and engine oil from escaping. At the same time, they ensure that no dirt particles, moisture, or air can enter the sensitive mechanism of the cylinder.

21 - 26 / 26 products

Filter

0 filters selected