Camshaft seal

Between the camshaft and cylinder head sits a camshaft oil seal. This component is responsible for sealing between the camshaft or camshafts and the cylinder head. These seals are usually made of rubber, so they are resistant to the movement of the camshaft. Over time, the rubber can dry out and crack. It is then important that you replace the camshaft oil seal. A leaking seal can cause engine oil to get onto the timing belt or V-belt. This can cause the belt to crack. A cracked or damaged belt results in high installation costs. Therefore, replace the camshaft oil seal immediately!

In addition, oil leakage is very bad for the engine. Engine oil protects the internal components from friction. Driving with a defective camshaft oil seal is therefore not recommended.

Camshaft oil seal defect

A defect in the camshaft oil seal has major consequences for the car engine. It is therefore important that you recognise the symptoms:

You see engine oil on the back of the engine
Oil flows along the edges and corners of the engine
Smoke is coming from the engine compartment.

Replacing the camshaft oil seal

Do you have some technical knowledge and understanding of car maintenance? Then you can replace the camshaft oil seal yourself. Keep in mind that it is not a small job. Several parts have to be disassembled, such as the timing belt and the camshaft sprockets. In addition, the engine oil must be drained and replaced. It can be different for each car make and model. The following steps will give you a general explanation of how to replace the camshaft oil seal:

1. Use a car jack to jack the car up. Stabilise the car with axle stands so that you can work safely under the car.

2. Drain the engine oil and collect it in a drain pan.

3. Remove the timing belt and camshaft sprockets.

4. You can now remove the camshaft oil seal.

5. Clean the area where the new seal is to be installed. For example, use brake cleaner for this.

6. Apply a thin layer of sealant to the new seal before installing this part.

7. Replace the camshaft sprockets and timing belt.

8. Refill the engine with engine oil and lower the vehicle.

Buying a camshaft oil seal

You can easily buy a new camshaft oil seal. Enter your registration number quickly on our website. We will then only show you the parts that fit your car. This way you can be sure that the parts fit. Are you looking for other seals for your car? In our range you will also find crankshaft seals, differential seals and gearbox seals.

Fit guarantee, show parts suitable for your vehicle.

Please manually select your vehicle

Camshaft seal

The camshaft oil seal sits between the camshaft and the cylinder head. It prevents engine oil from leaking between the two components. Some cars have two of these seals; for the front and rear of the cylinder head. If engine oil leaks onto the timing belt or V-belt, it can cause them to crack. Therefore, make sure you replace the camshaft oil seal immediately in case of leaks or defects. At Winparts, you can quickly find the right oil seal using our registration number check. Enter your car details or registration number on the website so that we can show you the correct camshaft oil seals. This way you can be sure that the parts will fit your vehicle.

201 - 220 / 356 products

Filter

0 filters selected